Insulation Company in Arlington, TX
Most Arlington homes leak conditioned air straight through the attic, and most homeowners don’t realize it until a July electric bill lands or a bedroom won’t hold temperature. That’s the reality of a city where slab-on-grade ranches and two-story brick homes built from the 1960s through the 1990s still carry original, badly settled insulation. We’re Woolsey Attic Insulation, and we handle attic insulation and spray foam work across Arlington with something this trade doesn’t always offer: a written price before any work starts, a real arrival window, and a 365-day guarantee in writing. Call (469) 916-4622 and you’ll get a live person, not a voicemail maze.
Why Arlington Homes Are Different
Arlington’s rapid post-1960s suburban expansion left behind thousands of homes with original batt insulation that went in fast and has settled badly since. In neighborhoods like Sherwood and West Arlington, we regularly open attic hatches and find the same story: batts slumped between joists, gaps at top plates, and blown-in fiberglass that’s been compressed flat by decades of heat and foot traffic. That settled insulation is why so many Arlington attics run far below the R-value the label claims.
The climate makes it worse. Arlington summers push attic temperatures past 140°F, which bakes ductwork and forces AC systems to work against air that’s already hot. Winter cold snaps, when they hit, let that same attic pull heat out of the living space overnight. Add humidity-driven moisture and the occasional hail storm that displaces loose-fill along the eaves, and you have a set of conditions that generic insulation advice simply doesn’t address. Arlington attics need air sealing first, then insulation sized for the actual heat load, not a one-size-fits-all guess.
Our Main Arlington Services
Arlington homeowners call us about two things most often, and each has its own dedicated page with local pricing and details.
Attic Insulation in Arlington
Most of the homes we see in Arlington have vented attics with compressed or uneven blown-in fiberglass and unsealed top plates. That combination lets conditioned air escape through dozens of small gaps while providing far less thermal resistance than the original install intended. We remove or top up what’s there, seal the bypass points, and install fresh material sized for Arlington’s heat. The telltale “dirty snow” pattern near the eaves, where wind-driven rain has shifted insulation, is a common finding in north Arlington homes from the 1970s. Learn more on our Attic Insulation in Arlington page.
Spray Foam Insulation in Arlington
Spray foam, a two-part liquid that expands on contact and seals gaps airtight, is a strong fit for Arlington attics where ductwork runs through unconditioned space. Those ducts can lose up to 30% of cooling before air reaches a room. Open-cell foam applied to the roofline brings the attic into the home’s thermal envelope, which changes how the whole system performs. It also handles the humidity swings that Arlington’s climate throws at vented attics. We work with Icynene and Demilec open-cell products regularly. Details are on our Spray Foam Insulation in Arlington page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arlington
We install and service insulation from Owens Corning, Icynene, Demilec, and GreenFiber, among others. Parts and materials are stocked locally, so most Arlington jobs move from estimate to completion without waiting on supply shipments. The material recommendation follows the home’s needs, not whatever happens to be on the truck. See our brands for the full breakdown.
Pricing for Insulation Company in Arlington, TX
| Service | Typical range in Arlington |
|---|---|
| Attic insulation upgrade (1,500 – 2,000 sq ft attic) | $1,800 – $3,400 |
| Attic air sealing + insulation top-up | $1,200 – $2,800 |
| Blown-in fiberglass (existing attic, R-38) | $1,600 – $2,900 |
| Batt insulation replacement (standard ranch attic) | $1,400 – $2,600 |
| Radiant barrier installation | $900 – $2,100 |
| Open-cell spray foam (attic roofline) | $4,200 – $7,800 |
| Spray foam air sealing only (rim joists, top plates) | $800 – $1,900 |
| Insulation removal (old or pest-damaged material) | $700 – $1,800 |
| Attic fan or ventilation correction | $400 – $1,200 |
What pushes an Arlington quote higher? Two things mostly: the size of the attic and how much old material has to come out before new insulation goes in. Homes with original 1970s batt insulation that has settled below R-11 often need full removal, which adds labor. Whatever the final number, you get it in writing before any work begins, along with a written guarantee on the finished job.
Neighborhoods We Serve in Arlington
We work across Arlington, from the older central neighborhoods where settled insulation is most common to the newer subdivisions where attic access and duct layout change the job. Typical response time across the Arlington area is same-day or next-day for estimates, with emergency calls handled as quickly as the schedule allows. Some of the neighborhoods we regularly serve include:
- Sherwood
- West Arlington
- North Arlington
- Dalworthington Gardens
- Pantego
Service Area – Cities Near Arlington
Our Arlington crews also serve homeowners in surrounding cities across the Dallas-Fort Worth metro. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, with techs working locally in each area. If you’re in Duncanville, TX, Red Oak, TX, Dallas, TX, or Carrollton, TX, the same written-price and guarantee terms apply.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Arlington
Yes. We cover the full city, including older central neighborhoods like Sherwood and West Arlington, the 1970s-era north Arlington subdivisions, and surrounding communities like Dalworthington Gardens and Pantego. Response is typically same-day or next-day for estimates. Call (469) 916-4622 to confirm your address.
Most insulation and air sealing work in Arlington doesn’t require a city permit, though some spray foam applications on new construction or major remodels may fall under broader building permits. We’ll flag any permit questions before work starts, and the written estimate covers exactly what’s included. Call us for a free evaluation.
Usually, yes. We answer the phone live around the clock, and Arlington estimates are often scheduled same-day or next-day depending on call volume. Every estimate includes a written price before any work is authorized. Call (469) 916-4622 and a real person will set it up.
Need insulation work in Arlington? Call (469) 916-4622 for a free estimate with a written price, a real arrival window, and a 365-day guarantee in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Arlington Customers Say
"Drafty old house that never felt comfortable. After the attic and some air sealing it's a different place. On time, clean, and the quote didn't change. Wish I'd done it years ago."
- Dmitri Kozlov"Upstairs was always ten degrees hotter than downstairs in summer. They added attic insulation and the difference is night and day. Written price up front, no add ons at the end."
- Edith Marlowe"Insulation job was done well. Scheduling took a little longer than I'd have liked, they were booked out a couple weeks. But once they came it was quick and the house is cozier."
- Felicia Grant